Standard | Drum Pump | Container Pump

	Engineered for use in corrosive environments. Ideally suited for transferring acids and alkalies.   Model Enclosure Power Watt V.F.D SP-ODP O.D.P 115/1/50-60 450 NO SP-ODP-2 O.D.P 230/1/50-60 450 NO NOTE: V.F.D = Variable Frequency Drive NOT SUITABLE FOR PUMPING FLAMMABLE OR COMBUSTIBLE LIQUIDS.
	Engineered for use in corrosive environments. Ideally suited for transferring acids and alkalies.   Model Enclosure Power Watt V.F.D SP-280P O.D.P(IP44) 115/1/50-60 825 NO SP-280P-V O.D.P(IP44) 115/1/50-60 825 YES SP-280P-2 O.D.P(IP44) 230/1/50-60 825 NO SP-280P-2-V O.D.P(IP44) 230/1/50-60 825 YES NOTE: V.F.D = Variable Frequency Drive NOT SUITABLE FOR PUMPING FLAMMABLE OR COMBUSTIBLE LIQUIDS.
	Engineered for use in heavily corrosive environments or when aggressive fumes are present. Ideally suited for transferring concentrated acids and alkalies.   Model Enclosure Power Watt V.F.D SP-ENC TEFC (IP54) 115/1/50-60 825 NO SP-ENC-V TEFC (IP54) 115/1/50-60 825 YES SP-ENC-2 TEFC (IP54) 230/1/50-60 825 NO SP-ENC-2-V TEFC (IP54) 230/1/50-60 825 YES NOTE: V.F.D = Variable Frequency Drive NOT SUITABLE FOR PUMPING FLAMMABLE OR COMBUSTIBLE LIQUIDS.
	Engineered for use hazardous duty locations. Ideally suited for transferring flammable/combustible liquids.   Model Enclosure Power Watt V.F.D SP-400-2 EXP 230/1/50-60 825 NO EEx de IIA T5 EN50014 96D.119 509 EN 50018 NOTE: V.F.D = Variable Frequency Drive SEE WARNING AT BOTTOM OF PAGE.
	Engineered for use in heavily corrosive environments or when aggressive fumes are present.Ideally suited for transferring flammable / combustible liquids.   Model Consumption Max. Inlet Pressure Ouput SP-A2 28 CFM@90 psi 100 psi   3/4 hp   13.2L/sec@6.2bar 6.8 bar 560w SEE WARNING AT BOTTOM OF PAGE.

WARNING: Pumping of flammables or combustible liquids can generate a static electric discharge, causing fire or explosion resulting in injury or death. Read and understand operating instructions before starting this unit. Follow all federal, state and local safety codes including NFPA 30 - NFPA77. Prior to connecting to air supply, install bond and ground wires and check continuity of each wire. A meter reading of one ohm or less is required for safe liquid transfer. Use only metallic drum, receiving vessel and metallic pump (SP-SS) when pumping flammables. Air motors are not recognized under any current Underwriter’s Laboratory listing program. Consult a qualified engineer for suitability for use in a hazardous area or on flammables.