Drum/Container Pumps

Engineered for use in corrosive environments. Ideally suited for transferring acids and alkalies.

Model	Enclosure	Power	Watt	V.F.D
SP-ODP	O.D.P	115/1/50-60	450	NO
SP-ODP-2	O.D.P	230/1/50-60	450	NO

NOTE: V.F.D = Variable Frequency Drive

NOT SUITABLE FOR PUMPING FLAMMABLE OR COMBUSTIBLE LIQUIDS.

Engineered for use in corrosive environments. Ideally suited for transferring acids and alkalies.

Model	Enclosure	Power	Watt	V.F.D
SP-280P	O.D.P(IP44)	115/1/50-60	825	NO
SP-280P-V	O.D.P(IP44)	115/1/50-60	825	YES
SP-280P-2	O.D.P(IP44)	230/1/50-60	825	NO
SP-280P-2-V	O.D.P(IP44)	230/1/50-60	825	YES

NOTE: V.F.D = Variable Frequency Drive

NOT SUITABLE FOR PUMPING FLAMMABLE OR COMBUSTIBLE LIQUIDS.

Engineered for use in heavily corrosive environments or when aggressive fumes are present. Ideally suited for transferring concentrated acids and alkalies.

Model	Enclosure	Power	Watt	V.F.D
SP-ENC	TEFC (IP54)	115/1/50-60	825	NO
SP-ENC-V	TEFC (IP54)	115/1/50-60	825	YES
SP-ENC-2	TEFC (IP54)	230/1/50-60	825	NO
SP-ENC-2-V	TEFC (IP54)	230/1/50-60	825	YES

NOTE: V.F.D = Variable Frequency Drive

NOT SUITABLE FOR PUMPING FLAMMABLE OR COMBUSTIBLE LIQUIDS.

Engineered for use hazardous duty locations. Ideally suited for transferring flammable/combustible liquids.

Model	Enclosure	Power	Watt	V.F.D
SP-400-2	EXP	230/1/50-60	825	NO
EEx de IIA T5 EN50014
96D.119 509 EN 50018

NOTE: V.F.D = Variable Frequency Drive

SEE WARNING AT BOTTOM OF PAGE

Engineered for use in heavily corrosive environments or when aggressive fumes are present.Ideally suited for transferring flammable / combustible liquids.

Model	Consumption	Max. Inlet Pressure	Ouput
SP-A2	28 CFM@90 psi	100 psi	3/4 hp
	13.2L/sec@6.2bar	6.8 bar	560w

SEE WARNING AT BOTTOM OF PAGE

WARNING: Pumping of flammables or combustible liquids can generate a static electric discharge, causing fire or explosion resulting in injury or death. Read and understand operating instructions before starting this unit. Follow all federal, state and local safety codes including NFPA 30 - NFPA77. Prior to connecting to air supply, install bond and ground wires and check continuity of each wire. A meter reading of one ohm or less is required for safe liquid transfer. Use only metallic drum, receiving vessel and metallic pump (SP-SS) when pumping flammables. Air motors are not recognized under any current Underwriter’s Laboratory listing program. Consult a qualified engineer for suitability for use in a hazardous area or on flammables.